English - 30 -
Getting Started
Remote Control
Teletext
Press TXT button to enter. Press again to activate mix
mode. Press once more to exit. Follow the instructions
displayed on digital teletext screen.
Digital Teletext (for UK only)
Press TXT button to view digital teletext information.
Operate it with the coloured buttons, cursor buttons
and the OK button. The operation method may differ
depending on the contents of the digital teletext. Follow
the instructions displayed on the digital teletext screen.
When the TXT button is pressed again, the TV returns
to television broadcast.
1. Standby / On
2. Play (in media browser mode)
3. No function
4. Mono-Stereo Dual I-II / Current language
5. Fast rewind (in media browser mode)
6. Colored buttons
7. Numeric buttons
8. Channel list
9. Navigational buttons
10. Ok/Conrm
11. Menu on / off
12. Return / back
13. Internet
14. Media browser
15. Electronic programme guide
16. Teletext - Mix
17. Volume up / down
18. Mute
19. Programme up / down
20. Image size
21. Info/Reveal(inTXTmode)
22. My button 1 / YouTube (*)
23. My button 2: Switches between digital/cable/
satellite broadcasts (**)
24. Exit
25. Quick menu
26. Previous programme / Now ( in EPG mode)
27. Fast forward (in media browser mode)
28. Subtitle on-off / Subtitle (in media browser
mode)
29. Stop (in media browser mode)
30. Pause (in media browser mode)
31. AV / Source
Using My button 1 (*)
This button’s main function is to run Youtube link. However, if
you want to change this function, you can press MY BUTTON
1forvesecondswhenonadesiredsource,channelorlink,
until the “MY BUTTON IS SET” message is displayed on the
screen.ThisconrmsthattheselectedMYBUTTONisnow
associatedwiththeselectedfunction.Notethatifyouperformrst
time installation, MY BUTTON 1 will return to its default function.
Using My Button 2 (**)
This button’s main function is to switch between DVB-T,
DVB-C and DVB-S broadcasts. However, if you press MY
BUTTON 2forveseconds,youcansetafunctiontoitas
described in My Button 1.
Notethatifyouperformrsttimeinstallation,MYBUTTON2will
return to its default function.