⚫ When the oven first plugged in, beep will sound and the display will show ”1:00” and .
⚫ During cooking, if press STOP/CANCEL pad once or open the door, the program will be paused, then
press START/QUICK START pad to resume, but if press STOP/CANCEL pad twice, the program will
be canceled.
⚫ After ending cooking, the system will sound beeps to remind user every two minutes until user press
any pad or open the door.
⚫ In standby mode, if there is not any operation within 1 minute, the backlight will turn off and the oven
enters power save mode.
This is a 24 or 12 hour clock, you can select it by pressing CLOCK/WEIGHT pad.
6. Touch CLOCK/WEIGHT pad once or twice to choose 12 or 24 hour clock.
7. Turn MENU/TIME knob to set the hour digit.
8. Touch CLOCK/WEIGHT pad to confirm.
9. Turn MENU/TIME knob to set the minute digit.
10. Touch CLOCK/WEIGHT pad again to confirm.
NOTE：During cooking, the current time can be seen by touching CLOCK/WEIGHT pad.
Microwave cooking allows you to customize cooking power and time. First, select a power level by
pressing the POWER LEVEL button (see the table below). Then turn the MENU/TIME dial to enter
cooking time. Maximum cooking time is 95 minutes. The oven will start cooking after you press
START/QUICK START pad.
Suppose you want to cook for 5 minute at 60% power level.
5. Open the oven door and place the food, close it.
6. Presses POWER LEVEL button a number of times till the screen show the intended power.
7. Turn MENU/TIME knob to enter cooking time.
To Next Page
Loading...