Telefunken S440 - Basic Functions; Setting Up Speed Dial; Managing Blacklist; Sending Text Messages (SMS)

16
To set up a speed dial number
You can assign a speed dial to the keys: 2-9, M1 and M2.
1. In the Contacts menu, press the left key, select Others using the key.
2. When Speed dial is selected, press the left key to confirm.
3. When M1, M2, or 2-9 are selected, go to Options > Edit or press the key. From the Input
number screen, enter the number in with the keypad then select OK or press the key.
Alternatively, press the left key to select a contact, then select OK or press the key.
4. Repeat the same method to assign any other key.
To check memory status
To check phone memory status, go to: Menu > Contacts > Others > Memory status, then press
the left or key.
To add a contact to blacklist
Go to: Menu > Call logs > Missed calls/Dialed calls/Received calls, then press the left or
key. In the selected list, press the left key and select Add to blacklist. incoming call and
messages from the selected number will be intercepted. To check the call log of contacts on the
blacklist, go to Menu > Call logs > Rejected calls.
6.7 Sending text messages (SMS)
1. To send a message, go to: Menu > Messages > Write message > New SMS.
2. Type the message and press the left key to open the Options menu.
3. Select Send and either enter the phone number using the keypad or go to Options > Add from
contacts. Use the / keys to select contacts. When the desired contact is selected, press
the left key and select Mark or simply press the key. Use the same method to mark other
desired recipients. When finished, press the left key and select OK. The numbers will be
displayed in the contacts menu.
4. Press the left or key to access Options menu and press Send.
h When editing a text message (SMS), press the left key to see the available options:
 Send  Access to insert number directly or select number from your Contacts.
 Insert template  Insert a predefined message. You can add or edit templates at: Menu >
Messages > Templates.
 Add contact info  Access your Contacts to select a contact number to insert into the
content of the message.
 Add phiz  Choose from a list of emoticons to add to the message.
 Save as draft  Save message in Drafts folder so it can be sent later.
 Exit  Return to Write message screen.