Telefunken S440 - Settings Guide; Security and Privacy Settings; Profiles and Network Configuration; Restoring Factory Settings

31
Setting Name Description
Security
PIN
Activate/deactivate/modify PIN code (protects the SIM
card only).
Modify PIN2 Select to modify PIN2 code.
Phone lock
Select On/O to lock/unlock the phone. If the phone is
locked, to unlock it you must input the lock password
(default is 0000) rst.
Change phone
password
Change the phone lock password. To change it, you
should enter the current password rst.
Privacy Setting
Toggles privacy protections for the following features: call
logs, messages, camera, contacts, my les, calendar, U
disk, audio player, and video player. The default password
is 0000.
Blacklist
h Blacklist list: Manage the blacklist by adding new
contacts, editing or deleting selected contacts,
importing contacts, or deleting all contacts.
h Blacklist settings: Set to activate/deactivate
interception of incoming call or messages from blacklist
contacts. To activate/deactivate these features select
Audio call interception/Message interception and
press the left or key.
Proles
(Options >
Settings)
Rename Rename the currently selected Prole.
Ring settings Set ringtone of incoming calls and messages.
Adjust volume
Set ringtone volume of incoming call, message and power
on & o. Also you can adjust call volume and speech dial
volume (Dial voice volume).
Ring type
Five options are available: Ringtone, vibrate, silent,
vibrate then ring, and ring and vibrate.
Other alert rings
Set key tone; Turn on/o low battery alert; Turn on/o dial
tone; Set ip tone; Set ip on tone.
Network
Network account
Add/delete network account and edit its access point,
user name, password, authentication type and proxy etc.
GPRS service Turn on or turn o GPRS service.
Data connection
settings
Set whether data connection should be always on or on
only when needed.
Network selection
Set whether phone should automatically or manually
select a carrier.
Restore
factory
settings
To reset all phone settings to factory default values, you must input the phone
lock password (default: 0000) rst.
WARNING: All settings, contacts, call logs, etc. will be deleted.