Telefunken S520 - Page 15

15
9.4 Multimedia
h Camera
To access camera mode, press the key from the main screen, or go to Multimedia -> Camera
-> click the left key to conrm -> press the to take a photo.
When in the camera interface, click the left key to enter more Options:
 Switch to video recorder
To switch to video mode, select Options -> Switch to video recorder (requires a memory card).
 Photos
Photos acts as a media player to view photos and videos.
 Camera settings
 Shutter sound

Choose a pre-loaded sound or Off.
 Brightness (EV)

Choose an exposure value (brightness) between -2 EV and +2 EV
in increments of 0.5 EV. In general, positive values make the image
brighter while negative values make it darker.
 Contrast

Choose Low, Medium or High contrast for taking photos.
 Anti-icker

Choose 50Hz or 60Hz frequency to remove icker.
 Delay timer

Choose a shutter delay time of 5, 10, or 15 seconds.
 Image settings
 Image size

Choose the size of photos taken by the camera. Available options
are 320x240, 800x600, 1280x960, 1600x1200 and 2048x1536.
 Image quality

Choose Low, Normal or Good image quality.
 Effect settings
Add an eect to the camera. Available options are Normal / Grayscale / Sepia / Sepia green /
Sepia blue / Color invert.
 Storage
Choose to store your photos in the phone or memory card.
 Restore default
You can restore default camera settings if necessary.
Tips:
 When camera is active, use M1 and M2 keys to decrease / increase the Exposure
Value (EV) - brightness of image.
 Press Up or Down key to zoom in and out.
h Video recorder
The video recorder allows for the recording of videos (sound is also captured).
 Switch to camera

For more details, please check "Camera" on page 15.
 Camcorder settings

Change settings including Brightness (EV), Night mode, and
Anti-icker.
 Videos settings

Change between Low / Normal / Good / High quality settings.
 White balance

Change between Auto / Daylight / Tungsten / Fluorescent /
Cloudy / Incandescent.
 Effect settings

Change between Normal / Grayscale / Sepia / Sepia green /
Sepia blue / Color invert.
 Storage settings

Choose to store your photos in the phone or memory card.
 Restore default

You can restore default camera settings if necessary.