Instruction Manual
4
Bluetooth operation
AUX input
Bluetooth wireless playback
• This unit can wirelessly playback audio
from any device with Bluetooth A2DP
function.
• The wireless range is approximately within
5 meters.
• Wireless audio streaming requires pairing
of a Bluetooth device (e.g. smartphone).
HOW TO PAIR YOUR DEVICE TO
THIS UNIT:
• Make sure the Bluetooth function is
switched on in your device (e.g. smartphone,
tablet).
• Switch on the unit and press and hold the
button to switch on the Bluetooth.
• Once the Bluetooth pairing indicator
begins flashing, you will find the unit listed in
the Bluetooth connections list of your device
(as TF-1701B).
• If asked for a passcode, enter “0000”.
• The initial setup is required only once
per device. The unit will automatically pair to
the last paired device.
• The LED indicator will flash when
searching for a Bluetooth device and stay
on when the devices are paired.
• When playing files, you can press
button to pause and resume
the
playback.
• Press the <</- or >>/+ button to go to a
previous or next track. Press and hold these
buttons to decrease or increase volume,
respectively.
• You can connect the audio output of an
external device to this unit, to listen to the sound
of that device through the speaker.
• To connect an external audio device,
please use the supplied audio cable with
3.5mm-to-3.5 mm plugs to connect the
headphone out or audio line-out of
the external
device to the AUX input of this unit.
• Turn on the external device. You can
press and hold the <</- or >>/+ buttons to
adjust the volume.
Snooze control
• When the alarm time comes,
press any button to snooze. The alarm
signal will stop ringing for 10 minutes.
Double press the button to cancel
snooze.
will sound for 2 minutes.
• If no button is pressed, the alarm
To Next Page
Loading...
