Telefunken TF-DVR23HD - Photo Setup

automatically switch off or disable this function.
• Beep Sound: enable or disable beeping
sounds when pressing buttons on the unit.
• Delay Off: Off/30s/1m/3m: select the time
period after switching the car ignition off when
the unit will continue recording or disable this
function.
• Language: select the system language.
• TV Mode: NTSC/PAL.
• Frequency: 50 Hz/60 Hz.
• Lamp Setting: Off/On: turn the infrared
lights on or off during recording in dark
envinronments.
• Backlight: Off/1m/3m/5m: Select the time
period after which the unit will automatically
switch off the screen backlight.
• Format SD card: select this option to
format the inserted SD card. WARNING: all
data on the card will be deleted.
• Default Setting: select OK to reset all
settings to default values.
• Version: check the current firmware
version info.
Video setup
• Resolution: select video resolution:
1080P 1920x1080 / 720P 1280x720 /
WVGA 848x480 / VGA 640x480.
•
Loop Recording: 1min/2 min/3 min
Select the maximum record cycle time.
• Exposure: adjust the image exposure.
• Motion Detection: Off/On. Activate or
deactivate the motion detection function.
• Record Audio: Off/On. Activate or
deactivate recording of sound for video
recording.
• Date Stamp: Off/On. Enable or disable
the display of the current date on the recorded
video.
•
GSENSOR: 2G/4G/8G. Adjust
the G-sensor sensitivity or turn this feature off.
Photo setup
• Capture Mode: Single/2S Timer/5S
Timer/10S Timer. Select the delay period after
which the photo will be taken automatically.
• Sequence: Off/On. Activate or deactivate
sequential image capture.
• Quality: Fine/Normal/Economy. Select the
image quality.
• Sharpness: Soft/Normal/Strong. Select the
image sharpness mode.
• White Balance: select the white balance
mode: Auto/Daylight/Cloudy/Tungsten/
Fluorescent.
• ISO: Auto/100/200/400. Adjust ISO
sensitivity.
• Exposure: adjust the image exposure.
• Anti-Shaking: Off/On. Enable or disable
the anti-shaking feature
• Quick Review: Off/2 seconds/5 seconds.
Select a period of showing the photo on the
display after it was taken.
• Date Stamp: Off/Date/Date Time. Activate
or deactivate showing of date on the photo.
Playback mode setup
• Delete: Delete Current/Delete All. Select
“OK“ to delete or “Cancel“ to cancel.
• Protect: Lock Current/Unlock Current/Lock
All/Unlock All. Enable or disable the protection
of files from manual deleting or overwriting.
•
Resolution: 12M (4032*3024) /
10M (3648*2736) / 8M (3264*2448) /
5M (2592*1944) / 3M (2048*1536) /
2M (1920*1080) / 1.3M (1280*960) /
VGA (640*480) Select the size and resolution
of the image.
Instruction manual
6
.