Need help?Do you have a question about the Telegrapher GORILLA and is the answer not in the manual?
Gorilla is an analog mid-field monitor designed for critical mixing and mastering applications.
Speakers operate at mains voltage. Avoid water, heat sources, and direct sunlight. Ensure power is off when connecting/disconnecting.
Do not dispose of with household waste due to hazardous substances. Contact local services for recycling information.
Details min/max voltage (100-240V AC), frequency (47-63 Hz), connector (3-pin IEC), and max input power (800W).
Dimensions are 318 x 450 x 275 mm (Height x Width x Depth).
Each speaker weighs 27 Kg.
Tweeter: 100 Wrms, Mid: 350 Wrms, Woofer: 350 Wrms.
Features load-independent frequency response, THD, and protection circuits (over current, thermal, auto standby).
Details driver materials and sizes: 2.5cm tweeter, 12cm mid, 22cm woofer, all with Patented Symmetrical Drive.
Instruction for positioning speakers: 'The tweeters should stay inside of your listening point.'
Use the input select button to choose between XLR and RCA inputs.
Set standby on/off via selection button. Auto-off after 120 mins if no signal is present.
Details pinout (1: Shield, 2: Hot, 3: Cold) and impedance for XLR balanced analog input.
Details pinout (Sleeve: Ground, Tip: Positive) and impedance for RCA unbalanced analog input.
Modifications by unauthorized personnel will void the warranty.
The Gorilla has four protection circuits against overheating, electrical failure, and high-frequency signals.
Front red LED blinks during clipping. Lower input signal; shut down if too much clipping occurs.
Check power outlet. Internal fuse is non-replaceable; contact support for service.
Check for protection triggers (overheating), cycle power, verify source signal and cables.
Assistance available via website for manuals, datasheets, and contact forms.
Connect via website and social media (Instagram, Facebook).
Two-year warranty against defects. Excludes cosmetic damage, accident, misuse. Original receipt required for validation.
The device described in this manual is the Telegrapher Gorilla mid-field monitor, designed for critical mixing and mastering applications. It is a high-quality analog loudspeaker, hand-made in Istanbul.
The Telegrapher Gorilla serves as an analog mid-field monitor, providing accurate sound reproduction for professional audio environments. Its primary function is to allow users to realize their audio endeavors at the highest level, making it suitable for critical listening tasks in mixing and mastering.
Dimensions and Weight:
Amplifiers: The Gorilla features a tri-amplified design with dedicated power for each driver:
Key amplifier features include:
Drivers:
Operating Voltage:
Inputs: The Gorilla offers both balanced and unbalanced analog input options:
Input Selection: Users can select between XLR (balanced) and RCA (unbalanced) inputs using the input select button located on the back panel.
Standby Function: The device includes a standby feature that can be toggled on or off via a button on the back panel. If the standby function is enabled and no signal is detected for 120 minutes, the Gorilla will automatically turn off to conserve power.
Driver Placement: For optimal listening, the tweeters of the Gorilla loudspeakers should be positioned inside the user's listening point.
Safety Precautions:
Protection Circuits: The Gorilla incorporates four protection circuits:
Service and Warranty:
Troubleshooting:
General Usage Advice:
Support: Telegrapher Loudspeakers offers support through their website, where users can find manuals, datasheets, and contact them via a form for any questions.
General| Brand | Telegrapher |
|---|---|
| Model | GORILLA |
| Category | Speakers |
| Language | English |
To Next Page