9
SPRÅK
Select language.
Select REPEAT AV (off) or PÅ (on).
The functions is if repeated receptions of the same CID
number will occupy a new memory location (REPEAT
AV) or if a repeated number only will update the same
number location (REPEAT PÅ).
This is if outgoing calls from extension phone should be
stored in the CID memory or not. Note! Calls from this
phone will never be stored in the CID memory.
Select OGC CID PÅ if you want outgoing numbers from
extension phone to be stored in the CID memory.
Note! “UTGÅENDE” must be selected PÅ to enable this
funcion.
Select OGC CID AV if you don’t want outgoing numbers
from extension phone to be store in the CID memory.
REPEAT
OGC CID
LYSDIOD
Select LED flash frequency.
0 = No flash.
2 = 2 sec between flashes.
4 = 4 sec between flashes.
8 = 8 sec between flashes.
UTGÅENDE
Select if outgoing calls from extension phone should be
stored in the SENASTE (UTGÅENDE PÅ) memory or
not (UTGÅENDE AV).
TID/DATUM
Clock and date setting.
HOURS. Note! You can select 12- or 24-hour clock by
setting the hour. The first 24 steps are for 24-hour clock
and following 24 steps are for 12-hour clock.
Set minute (0-59).
Set month (1-12).
Set day (1-31).
timmar
minuter
månad
dag
To Next Page
Loading...