7
For outgoing calls, the call duraton timer will start about 6s after the last
digit in the phone number is dialled.
If “utgående” is selected “PÅ”, (see page 8 settingas) the call
duration timer will start for outgoing call from extension phones as well.
The call duration timer will also start for incoming calls (provided you
have CID (nummerpresentation) service on).
SEKR. key is used to mute the microphone during a call. SEKR is shown on
the display as long as the microphone is muted. Use SEKR. key again to
release the microphone mute.
The LED will flash if new CID is received. Answered call will not make
the LED flash.
Double flashing LED indicates message waiting in the mailbox “Telia
TeleSvar”.
Lif the hanset and press SENASTE.
If the calling line is busy, you can just press SENASTE again. You don’t have
to hang up, PreView Top handles the disconnection and connection to get a
new dialtone.
REDIAL
MUTE
LED
Call Duration Timer
To Next Page
Loading...