TELEPASS TRUCK APP SETTINGS
Check the data and device settings.
The Dashboard page shows the following
information:
l
device status and identification
l
language set
l
weight and number of the axles set
l
any notifications received
Check the vehicle data
The Vehicle Info page shows the following
information:
l
vehicle plate and nation
l
emissions class
l
tractor axles and weight
Select the language
>
1. Select the language desired, then press OK.
2. Select Save to confirm the settings.
Set the vehicle weight
>
1. Select the correct weight category, then press
OK.
2. Select Save to confirm the settings.
Set the vehicle axles
>
1. Select the correct number of axles, then press
OK.
2. Select Save to confirm the settings.
Display the notifications
This page shows the notifications received.
TRAVELING
Before departing (GO Austria service
only)
NOTICE:
l
Check that the information on the vehicle
declaration supplied with the device corresponds
to the actual vehicle and device installed.
l
Make sure the number of axles and other data
match the real vehicle specifications.
Before departing (Viapass Belgium
service only)
See enclosed sheet Mandatory instructions to travel
in Belgium (Viapass service).
Before departing (Scandinavia service
only)
NOTICE: check that the information on the vehicle
declaration supplied with the device corresponds to
the actual vehicle and device installed.
Before departing (only LKW-Maut in
Germany and eToll Poland EETS service)
NOTICE:
l
Upon departure, make sure that the weight set
matches the maximum transportable weight
(trailer included, if any).
l
Make sure the number of axles and other data
match the real vehicle specifications.
Before departing (only HU-GO Hungary,
LSVA Switzerland, and TOLLPASS
Bulgaria service)
NOTICE: make sure that the number of axles and
other data match the actual vehicle specifications.
Telepass SpA - Via Laurentina, 449 - 00142 Rome (RM) - Italy - www.telepass.com
TLP-K1-Uso-1.1_A4_EN-0123 © 2023
To Next Page
Loading...
