Ver. 0 6
2. Specification
2.1. RF Specifications
Frequency Band 824 – 849 MHz, Uplink (Reverse Link)
869 – 894 MHz, Downlink (Forward Link)
Number of Bands 2
Bandwidth 0.5 – 20 MHz, Programmable
Gain Adjustment Range 55 – 85 dB (1 dB Steps)
ALC > 30 dB
Absolute Group Delay < 10 µs (8 µs Typical)
Output Power +30 dBm, Total
Maximum Input Power +13 dBm
(Non-destructive)
Out of Band Spurious Emission -30 dBm, max.
Selectivity < -20 dB @ +/-500 kHz out of band
< -30 dB @ +/-700 kHz out of band
< -50 dB @ +/-1 MHz out of band
Pass Band Ripple 6 dB
(Typical 3 dB @ +/-1 MHz departure from the
edge within the selected band)
Noise Figure at Max Gain 5 dB
VSWR < 1.5 : 1
2.2. Electrical Specifications
Power Supply Voltage (default) 115 V AC
Power Consumption, max 200 W
DC Output of PSU 27 V, 12 V
2.3. Mechanical Specifications
Dimensions (W×H×D) 410 mm × 520 mm × 234 mm
Weight 23 kg
RF Connector N-type female
Signal Connectors RJ45 Modular Jack
DB25 female for 8 dry contact output
DB9 female for 6 dry contact input
To Next Page