ENGLISH
available channels list will then be accessible only if the TV is in the correct TV section
(terrestrial/cable/ satellite). In particular, to switch from viewing a terrestrial channel to a satellite
channel, press the MENU button, enter the Channel menu, and set the Antenna Type to Digital SAT
(satellite). If you want to return to the terrestrial channel list, set the Antenna Type back to Digital
terrestrial.
Smart (Home) mode
The Home menu, also directly accessible from the HOME key on the remote control, mainly allows
access to the so-called Smart section (connected component/IP) to manage and use the IP
applications and the browser for navigation, as well as access to the various sources of input/mode.
APPS selection
Moving to the APPS section of the Home menu, you can see the list of all IP applications installed
under the Application List (accessible directly from the APP button on the remote control), where
you can also access the application store to download and install new ones.
The Multimedia submenu on the other hand allows access to the Multimedia player function
(Media player), to reproduce multimedia audio/video contents saved on an external USB memory
device or to manage files saved in the internal TV storage (e.g. installation of APK expert users, a
procedure recommended only for expert users).
Settings section
The submenu to configure the connection to the Internet (via LAN cable or via Wi-Fi) is particularly
important. This submenu is essential to use the connected Smart/TV functions and can be reached
from the path: Home Menu> Settings> Other Settings > Network. It is useful if you want to change
the network settings defined during initial installation. In the Other Settings menu, you will also
find: Time settings submenu to adjust the time and related parameters, the Common Settings
submenu for general changes such as language, keyboard type, permissions/account management
and finally the Info submenu to consult technical system information such as the MAC addresses of
the Ethernet/LAN and Wi-Fi interfaces.
Advanced functions
Antenna system configuration
The factory settings provide that the satellite system can receive signals simultaneously from 2
satellites via DiSEqC switch, HotBird 13° East in first position and Astra 19.2° East in second position.
If the system does not correspond to the settings indicated, it is necessary to modify the default
settings to make them consistent with the satellite dish used.
NOTES AND WARNINGS
The TV is compatible with single universal, multi-satellite DiSEqC 1.0 and multi-user SCR/Uni-cable
systems. Motorized antennas (DiSEqC 1.2 and USALS) are not supported.
To Next Page
Loading...