25
3.- Press OK and the select “On”. Press OK again to
select the On option.
4.- Turn the meter o by pressing the “Device On/
O” button for some seconds.
5.- The meter will connect to our server, download
the new rmware and install it in your H30. This
process will take around ve minutes.
6.- When the installation is complete, press the OK
button to reboot the meter.
Note: When your H30 connects to the server to
update the rmware, it checks in our database if you
have purchased any of the available options. If so,
they will be activated automatically with the update.
3. Remote Control
Allows remote use of the H30 with your web
browser.
Important:
- You need to have a connection to the internet.
- Your web browser must support HTML5.
- Google Chrome or Safari is recommended.
- Open your browser in your PC or in your tablet.
- Congure your network parameters (see section
1.- Network setup).
To Next Page
Loading...