TeleWell TW-EAV510 - The Rear Ports

23
The Rear Ports
Port
Meaning
1
Power
Switch
Power ON / OFF switch.
2
Power
Connect the supplied power adapter to this jack.
3
USB (on the
side)
Connect the 3G/4G LTE USB modem to this port.
4
Ethernet
(LAN1-4)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
four LAN ports when connecting to a PC or an office/home
network.
5
WAN
Connect Ethernet cable for WAN connections (red port)
6
DSL
Connect this port to the DSL network with the RJ-11 cable
(telephone) provided.
7
RESET
After the device is powered on, press it 5 seconds or above: to
restore to factory default settings (this is used when you cannot
login to the router, e.g. forgot the password)
8
WPS
Push WPS button to trigger Wi-Fi Protected Setup function.