Need help?Do you have a question about the Telex Stratus 30 and is the answer not in the manual?
Details passive and active noise reduction levels for Stratus 30XT and Stratus 30 models.
Explains detented sliders, yoke design, and Comfort Camtm for adjustable fit and pressure.
Highlights the amplified noise-canceling microphone and its rotation feature.
Covers shielded cables, strain relief, and various connector types for audio and power.
Describes automatic headset shutdown in low-noise environments after 15 minutes of inactivity.
Details controls, LED indicators, and accessory mute for managing headset functions.
Specifies microphone bias voltage and headset power options (batteries or panel power).
Instructions for adjusting headband sliders to ensure proper ear cup centering and fit.
Guide to using the Comfort Camtm to set pressure for optimal seal and noise reduction.
How to rotate and reshape the microphone boom for optimal voice capture.
Instructions for setting DIP switches to match aircraft audio system for mono or stereo sound.
Steps for installing batteries and connecting external audio devices like cell phones.
Explains how to adjust volume, power the headset on/off, and use the accessory mute function.
Details on charging batteries using adapters and interpreting LED status signals.
Procedure for disabling the auto shut-off function using the DIP switch.
Provides a guide to the meaning of different LED blinking patterns and colors.
Information on factory-set microphone gain and how qualified technicians can adjust it.
Instructions for replacing the microphone element and ear cushions.
Presents the wiring schematic for microphone and speaker connections.
Lists technical specifications for receivers, microphone, cordage, and connectors.
Provides catalog numbers for various headsets, accessories, and replacement parts.
Details the uniform limited warranty, including exclusions, limitations, and remedies.
Explains the process for obtaining warranty service, including required documentation.
Provides contact details for technical assistance and customer inquiries.
Outlines the steps for returning equipment for factory repair, both warranty and non-warranty.
To Next Page
General