GT863-PY Terminal Product Description
80269ST10026a Rev. 2 - 18/03/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 10 of 51
2.3 Installation
The Telit GT863-PY can be fixed on a suitable surface by two screws through the holes (3,3 / 5,8
mm diam.) in the lids forming part of the front and rear panels. The figure shows the maximum and
minimum inter-axis distance between the fixing holes.
In case of a permanent vertical installation in dusty environment, it is recommended to cover the
SIM slot with a self-adhesive tape.
2.4 Environmental requirements
The Telit GT863-PY is compliant with the applicable ETSI reference documentation GSM 05.05
Release1999 ETSI EN300910 V8.4.1
2.4.1 Temperature range
GT863-PY Note
–20°C ÷ +55°C
Full function; Full
specification compliance
Operation temperature
–20°C ÷ +70°C
Full function*
Temperature in not functional
conditions
–30°C ÷ +85°C
* Temperature outside the –20°C ÷ +55°C range can affect the sensitivity, the performance and the MTBF of
the terminal.
2.4.2 RoHS compliance
The GT863-PY is fully RoHS compliant to EU regulation.
To Next Page
Loading...