GT863-PY Terminal Product Description
80269ST10026a Rev. 2 - 18/03/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 6 of 51
1 Overview
Aim of this document is the description of features, functions and interfaces of the Telit GT863-PY
Terminal which is a complete modem solution for wireless m2m applications based on the GE863-
PY core. Since this Terminal is ready for use as a subsystem for wireless connections, Safety
Information and basic instructions for taking the GT863-PY into operation are included, as well as
guidance to other documentation and practical hints for the first steps.
The Telit GT863-PY Terminal is GSM Mobile Stations (MS class B) capable of using the GSM
Circuit Switched Data (CSD), Fax and Short Message Services (SMS).
NOTE: Telit GT863-PY Terminal is an evolution of EZ10-PCS with PYG option and EZ10-QUAD-
PY fully compatible with the previous models.
The frequency bands and GPRS class are reported in the following table:
Frequency Bands GPRS
RJ11 AUX
Connector
Product Name
GSM-850 / EGSM-900 / DCS-
1800 / PCS-1900 MHz Quad-
Band
Class 10 GPIO
Telit GT863-PY
The embedded PYTHON engine allows to perform stand-alone operations with the EASY SCRIPT
feature, interpreting user-defined scripts in PYTHON language, e.g. to read external sensors
connected to the General Purpose Inputs / Outputs (GPIO) on the RJ11 connector. Refer to the
chapter about Software Features in this Product Description.
To Next Page
Loading...