GT863-PY Terminal Product Description
80269ST10026a Rev. 2 - 18/03/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 42 of 51
• Press OK to the initial message.
NOTE: In connection with the GT863-PY Terminal, charged battery has to be understood that
the power supply must not be disconnected during the firmware update.
• Select the right COM port and speed. Note that to go faster than 115200 you need a
special hardware on the PC. Then Press the Download button and within 5 seconds power-
on the GT863-PY.
Wait for the end of programming green message OK
To Next Page
Loading...