Telit Wireless Solutions LM940 - Power Supply and Operation; SIM Card Connection

POWER SUPPLY
You can use the both 110V and 220V power for adapter.
SIM Card
You can use the SIM1 Connector on the top interface board.
POWER ON
To power ON the Telit module, plug adapter in adapter port located on the side of
interface board.
POWER OFF
To power OFF the Telit module, Unplug the adapter.
RF cable to SMT connector loss
699 ~ 960 MHz: 0.1 dB
1710 ~ 2690 MHz: 0.25 dB
2300 ~ 2690 MHz: 0.4 dB