Need help?Do you have a question about the Telit Wireless Solutions ME910C1 Series and is the answer not in the manual?
General| Brand | Telit Wireless Solutions |
|---|---|
| Model | ME910C1 Series |
| Category | Wireless modules |
| Language | English |
Details the pin assignment and function for various interfaces like USB, Serial, SIM, DVI, SPI, GPIO, ADC, RF.
Provides a top-view layout of the module's LGA pads, showing pin assignments and groupings.
Details the external power supply connection and voltage/current requirements for the ME910C1 module.
Presents preliminary data on the module's average current consumption in various operating modes.
Outlines the key guidelines for power supply design, covering electrical, thermal, and PCB layout aspects.
Defines the absolute maximum ratings and operating range for input/output logic levels for the module.
Details the procedure and pin configuration required to turn on the ME910C1 module.
Explains the two methods for turning off the device: AT command and ON_OFF*/WAKE* pin.
Details the use of the HW_SHUTDOWN* signal for unconditional shutdown and reset.
Explains the Fast Shut Down feature to reduce current and power-off time without data corruption.
Covers the various communication interfaces including USB, SPI, and Serial ports.
Explains the configurable Digital Input/Output pins (GPIO) and their functions.
Provides reception sensitivity values (REFsens and 3GPP REFsens) for different modes and bands.
Details the necessary antenna connection and PCB layout design guidelines for optimal performance.
Emphasizes critical safety precautions regarding product usage, environment, and handling.
To Next Page
