Telit Wireless Solutions LM940 - Module Detachment from TLB Board; Step-by-Step Detachment Process

4. Module detachment from TLB board
You can separate module from TLB board referring the following STEP1 and STEP2.
PRESS
LIKE THIS
Before detaching
STEP
“1”
*Note
After step 1,
you are able to detach a module
from TLB like STEP”2” picture.
STEP
“2”
After STEP “1”
*Note
When detached, the thermal pad is
attached to the module because it is
sticky.
So, you should move thermal pad and
attach back it on TLB board.
MOVE