Telit Wireless Solutions ME310G1 - Page 133

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 133 of 545 2020-04-15
...
...
2147483648
B32
Value:
1÷4294967295
:
range of the sum of Band number (1+2+8 ...)
<TDSCDMA_band>
integer
0
this parameter is used for backward compatibility
Value:
0
:
for both 4G only and 4G/2G products
<LTE_band_over_64>
integer
N/A
indicates the LTE high supported bands
expressed as the sum of Band number (1+2+8
...) calculated as shown in the table (mask of 32
bits):
Band number
Band i
1
B65
2
B66
4
B67
8
B68
...
...
(2exp(i-1))
Bi
...
...
2147483648
B128
Values:
0
:
no high band selected
1÷4294967295
:
range of the sum of Band number (1+2+8 ...)
AT#BND?
Read command returns the current selected bands in the format:
#BND: <band>,<UMTS_band>,<LTE_band>,< TDSCDMA_band>,< LTE_band_over_64>
AT#BND=?
Test command returns the supported range of values of parameters <band>,
<UMTS_band>,<LTE_band>,< TDSCDMA_band> and < LTE_band_over_64>.
Test command
AT#BND=?#BND: (0-5),(0),(4-524420),(1-252655775),(0),(0,2-1048642)
OK
Read command
AT#BND?#BND: 5,0,524420,252655775,0,1048642
OK