Telit Wireless Solutions ME310G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 213 of 545 2020-04-15
3.5.2. AT+CPMS - Preferred Message Storage
The command selects the memory storage used by SMs (Short Messages).
3GPP TS 27.005
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT+CPMS=<memr>[,<memw>[,<mems>]]
Set command selects memory storages <memr>, <memw> and <mems> to be used for reading,
writing, sending and storing SMs
The command returns the memory storage status in the format:
+CPMS: <usedr>,<totalr>,<usedw>,<totalw>,<useds>,<totals>
The returned parameters are described in the Additional info section.
Parameters:
Name
Type
Default
Description
<memr>
string
SE
memory from which messages are read and deleted
Values:
ME
:
SMS memory storage in Flash
SE
:
SIM SMS memory storage
<memw>
string
SM
memory to which writing and sending operations are made
Values:
ME
:
SMS memory storage in Flash
SM
:
SIM SMS memory storage
<mems>
string
SM
memory to which received SMs are preferred to be stored
Values:
ME
:
SMS memory storage in Flash
SM
:
SIM SMS memory storage
Additional info:
Here is the meaning of the parameters returned by the command.
Name
Type
Default
Description
<usedr>
integer
-
number of SMs stored in <memr>
<totalr>
integer
-
max number of SMs that <memr> can contain
<usedw>
integer
-
number of SMs stored in <memw>
<totalw>
integer
-
max number of SMs that <memw> can contain

Telit Wireless Solutions ME310G1 Specifications

General

Module Type	LTE Cat M1/NB1
Operating Temperature	-40°C to +85°C
Form Factor	LGA
Storage Temperature	-40°C to +85°C
RoHS Compliance	Yes
Frequency Bands	B1/B2/B3/B4/B5/B8/B12/B13/B20/B25/B26/B28/B66/B71
Interface	UART, GPIO, I2C, SPI
Cellular Technology	LTE Cat M1
SIM Interface	1.8V/3V
Certifications	GCF, PTCRB, CE, FCC, IC