Telit Wireless Solutions ME910C1 Series - 4. POWER SUPPLY; 4.1. Power Supply Requirements

24 of 33
Reproduction forbidden without Telit Communications PLC written authorization – All Rights Reserved
On ME910G1, ML865G1 and ME310G1:
AT#CPSMS=[<mode>[,<ReqPeriodicRAU>[,<ReqGPRSreadyTimer>[,<ReqPeriodicTAU
>[,<ReqActiveTime>[,<psmVersion>[,<psmThreshold>]]]]]]]
The command has two additional parameters compared to the implementation on ME910C1
and ML865C1: <psmVersion> and <psmThreshold>. The other parameters have the same
meaning and functionality as defined for ME910C1 and ML865C1.
<psmVersion>: integer N/A bitmask to indicate PSM modes. Each bit is configured
independently.
Default value: <psmValue>=4
Values:
0 : PSM without network coordination
1 : Rel 12 PSM without context retention
2 : Rel 12 PSM with context retention
3 : PSM in between eDRX cycles
<psmThreshold>: integer - Minimum duration threshold (in sec) to enter PSM. Default and
minumim value is 60 seconds.