Telkom Big Button - Recall Function; Receiver Volume Control; Timer Usage

3.5. Recall
Many special network services, such as WaitingCall, require a switch hook signal.
The RECALL button provides the electronic equivalent of a switch hook operation.
For example, if you subscribe to WaitingCall*, you can use this feature to put
your current call on hold and answer another call on the same line by pressing
the RECALL button. Press the RECALL button and then press 2 to answer the
second call.
* Please note that a subscription is required to use these services. Call Telkom
on 0800 600 015, to subscribe to this service.
3.6. Receiver Volume Control
The RECEIVER button allows you to adjust your handset volume from normal to
high volume for a more comfortable listening level. During the telephone
conversation, press this button once to set the receiver volume louder, press the
button once again to reset to normal. After you replace the handset, the receiver
volume will be reset to normal automatically.
3.7. Timer
You can activate the timer at any time by pressing the TIMER button, 0-00
appears on the LCD and starts the timer. Press the TIMER button again to stop
the timer. The maximum timer duration is 60 minutes where after the timer will
start again from 0-00.
3.7.1. Answering a Call
After lifting the handset, the LCD will display 0-00, and the timer will start. To
reset to 0-00, press TIMER button once.
3.7.2. Place a Call
After you have dialed out, the LCD displays the dialed telephone number. After
dialling the telephone number, the timer will start.
Page 5