12
9. Storing a number
You can store up to 3 numbers in your phone’s one-touch
memory for quick and easy dialing. The maximum stored
number length is 32 digits.
1. In the on-hook or off-hook state, use the p q
buttons to select a number from the incoming list or
the OUT button to select a number from the outgoing
list or enter the desired number from the keypad.
2. Press the SET button. The display shows STORE IN.
3. Press the desired memory location (M1, M2 or M3).
4. The number will then automatically be stored.
NOTE: To update the number stored in the one-touch memory,
repeat above steps and the new number will replace the old
one.
To dial a number from the one-touch memory:
1. Lift the handset or press the button.
2. Press the relevant one-touch button (M1, M2 or M3).
3. The number will then automatically be dialed.
To review a number in the one-touch memory:
1. In the on-hook state, press the desired memory
location (M1, M2 or M3).
or
To Next Page
Loading...