Need help?Do you have a question about the tell Gate Control BASE 1000 Series and is the answer not in the manual?
Explains the basic function and control methods of the Gate Control BASE device.
Details the variations and similarities between different models based on modem technology.
Explains the necessity and methods for synchronizing the device's system time.
Discusses data usage for remote access and internet-based services.
Guides on configuring and using the device's four configurable contact inputs.
Outlines the policy for handling user personal data within the system.
Defines the manufacturer's responsibilities and limitations regarding the device's use.
Explains the automatic power disconnection feature to protect the device from low voltage.
Details how to connect normally open (NO) and normally closed (NC) dry contacts to inputs.
Describes how to connect the relay outputs (OUT1, OUT2) based on different control modes.
Lists system terminal inputs and outputs with their specifications.
Provides wiring schematics for control modes 1 and 2 for gate automation.
Provides wiring schematics for control modes 3, 4, and 5 for gate automation.
Instructions for accessing and installing the SIM card into the device.
Guidance on connecting the GSM antenna to the device for optimal signal.
Environmental considerations and site selection advice for device installation.
Steps for initial setup, SIM card configuration, and powering up the device.
Explains the meaning of different LED indicator states for device status.
Lists key technical parameters of the Gate Control BASE device.
Outlines the methods for configuring the device settings.
Describes the software's UI, language selection, and appearance customization.
Presents the options for connecting to the device for configuration: USB and Cloud.
Step-by-step guide for establishing a connection using a USB cable and the software.
Details how to connect to the device remotely via the internet using the cloud service.
Explains the process of initiating and establishing a remote connection via SMS and cloud.
Focuses on the software's connection options and status indicators.
Explains how to view and configure device settings offline using the software.
Details how to select connection types (USB/Cloud), change passwords, and restart the device.
Covers restoring factory default settings via USB and using the device register.
Details options for adding, editing, deleting, and exporting device register entries.
Introduces the section for configuring various device settings.
Covers general settings like SIM, permitted entry period, and miscellaneous options.
Details SIM settings (PIN, APN) and permitted entry period configuration.
Explains miscellaneous settings such as admin email, SMS forwarding, and daily limits.
Guides on configuring input types, sensitivity, and restore sensitivity for inputs IN1-IN4.
Explains how to configure phone numbers for receiving notifications from contact inputs.
Details how to configure SMS and voice call notifications for input events.
Describes voice call and SMS notification settings, including call duration and custom messages.
Explains how to configure the operation of outputs OUT1 and OUT2 using different control modes.
Details control mode 1 for selective or simultaneous control of outputs via caller ID.
Explains control mode 2 for selective/simultaneous control and control mode 3 for single-gate automation.
Details control mode 4 and 5 for single-gate automation with different input triggers.
Covers device lock settings, operator, and network selection for the modem.
Explains network management, operator selection, and searching for mobile operators.
Discusses network selection options and device locking functionality.
Introduces the section for configuring user and remote access settings.
Guides on adding, configuring, and managing user accounts and their permissions.
Details options for adding new users, cloning, editing, deleting, and bulk adding users via CSV.
Explains the import summary for bulk user addition and saving user data.
Covers user settings like name, phone number, role, and permissions for controlling outputs.
Explains how to configure remote access passwords for administrators.
Details adding, editing, and deleting remote access entries and their access levels.
Introduces the section for monitoring the device's current status.
Shows how to read and refresh device status information like firmware, signal, and I/O states.
Lists available status information including device details, counters, network, and I/O states.
Explains options for reading status remotely and synchronizing system time.
Describes how to view and export event logs, including control and input events.
Explains how to view system logs for troubleshooting internal processes and communication.
Introduces settings related to the programming software's appearance and logging.
Covers software settings like UI skin, default layout, and extended logging.
Displays information about the software version, manufacturer, and data folder path.
Details how to configure device settings and manage users via SMS commands.
Provides a comprehensive list and explanation of available SMS commands for configuration.
Instructions for updating the device's firmware to the latest version.
Covers firmware updates using a desktop application or the programming software via USB.
Explains how to perform firmware updates remotely via the Internet.
Guides on resetting the device to its original factory default configuration.
Details the process of factory reset using the programming software.
Explains how to perform a factory reset using the physical reset button on the device.
Lists the items included in the product package.
Explains the basic function and control methods of the Gate Control BASE device.
Details the variations and similarities between different models based on modem technology.
Explains the necessity and methods for synchronizing the device's system time.
Discusses data usage for remote access and internet-based services.
Guides on configuring and using the device's four configurable contact inputs.
Outlines the policy for handling user personal data within the system.
Defines the manufacturer's responsibilities and limitations regarding the device's use.
Explains the automatic power disconnection feature to protect the device from low voltage.
Details how to connect normally open (NO) and normally closed (NC) dry contacts to inputs.
Describes how to connect the relay outputs (OUT1, OUT2) based on different control modes.
Lists system terminal inputs and outputs with their specifications.
Provides wiring schematics for control modes 1 and 2 for gate automation.
Provides wiring schematics for control modes 3, 4, and 5 for gate automation.
Instructions for accessing and installing the SIM card into the device.
Guidance on connecting the GSM antenna to the device for optimal signal.
Environmental considerations and site selection advice for device installation.
Steps for initial setup, SIM card configuration, and powering up the device.
Explains the meaning of different LED indicator states for device status.
Lists key technical parameters of the Gate Control BASE device.
Outlines the methods for configuring the device settings.
Describes the software's UI, language selection, and appearance customization.
Presents the options for connecting to the device for configuration: USB and Cloud.
Step-by-step guide for establishing a connection using a USB cable and the software.
Details how to connect to the device remotely via the internet using the cloud service.
Explains the process of initiating and establishing a remote connection via SMS and cloud.
Focuses on the software's connection options and status indicators.
Explains how to view and configure device settings offline using the software.
Details how to select connection types (USB/Cloud), change passwords, and restart the device.
Covers restoring factory default settings via USB and using the device register.
Details options for adding, editing, deleting, and exporting device register entries.
Introduces the section for configuring various device settings.
Covers general settings like SIM, permitted entry period, and miscellaneous options.
Details SIM settings (PIN, APN) and permitted entry period configuration.
Explains miscellaneous settings such as admin email, SMS forwarding, and daily limits.
Guides on configuring input types, sensitivity, and restore sensitivity for inputs IN1-IN4.
Explains how to configure phone numbers for receiving notifications from contact inputs.
Details how to configure SMS and voice call notifications for input events.
Describes voice call and SMS notification settings, including call duration and custom messages.
Explains how to configure the operation of outputs OUT1 and OUT2 using different control modes.
Details control mode 1 for selective or simultaneous control of outputs via caller ID.
Explains control mode 2 for selective/simultaneous control and control mode 3 for single-gate automation.
Details control mode 4 and 5 for single-gate automation with different input triggers.
Covers device lock settings, operator, and network selection for the modem.
Explains network management, operator selection, and searching for mobile operators.
Discusses network selection options and device locking functionality.
Introduces the section for configuring user and remote access settings.
Guides on adding, configuring, and managing user accounts and their permissions.
Details options for adding new users, cloning, editing, deleting, and bulk adding users via CSV.
Explains the import summary for bulk user addition and saving user data.
Covers user settings like name, phone number, role, and permissions for controlling outputs.
Explains how to configure remote access passwords for administrators.
Details adding, editing, and deleting remote access entries and their access levels.
Introduces the section for monitoring the device's current status.
Shows how to read and refresh device status information like firmware, signal, and I/O states.
Lists available status information including device details, counters, network, and I/O states.
Explains options for reading status remotely and synchronizing system time.
Describes how to view and export event logs, including control and input events.
Explains how to view system logs for troubleshooting internal processes and communication.
Introduces settings related to the programming software's appearance and logging.
Covers software settings like UI skin, default layout, and extended logging.
Displays information about the software version, manufacturer, and data folder path.
Details how to configure device settings and manage users via SMS commands.
Provides a comprehensive list and explanation of available SMS commands for configuration.
Instructions for updating the device's firmware to the latest version.
Covers firmware updates using a desktop application or the programming software via USB.
Explains how to perform firmware updates remotely via the Internet.
Guides on resetting the device to its original factory default configuration.
Details the process of factory reset using the programming software.
Explains how to perform a factory reset using the physical reset button on the device.
Lists the items included in the product package.
General| Brand | tell |
|---|---|
| Model | Gate Control BASE 1000 Series |
| Category | Gate Opener |
| Language | English |
To Next Page