34
STORING NAMES AND NUMBERS
How to Enter a Name
To enter a name, use the keys [0] through [9].
Each keys corresponds to several characters (see
the keypad character table) at the end of this
section.
Press a key several times to obtain the desired
character. For example to enter the letter C press
[2], [2], [2].
Press [t] to move to the next letter if this is on the
same key as the current letter. If not the just press
the key you want.
For example to enter MAC press [8], [2], [t] [2],
[2], [2].
To enter a space press [1]. To enter two spaces
press [1] [t] [1].
Press [s] (PREV) to move the cursor left and [t]
(NEXT) to move the cursor right.
Press to delete the character at the current
cursor position.
Press and hold to clear all characters one by
one.
To insert a character position the cursor to the
immediate right of the insertion point and press the
desired key(s).
PREV
a200ug.p65 3/7/01, 11:10 AM34
To Next Page
Loading...
