EasyManuals Logo

Telstra EASY CONTROL 101 User Manual

Telstra EASY CONTROL 101
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
GETTING TO
KNOW YOUR
TELSTRA EASY
CONTROL 101
CORDLESS
PHONE
Do not use this product near water (for
example, near a bath tub, kitchen sink, or
swimming pool).
Do not allow anything to rest on the power
cord. Place the power cord so that it will
not be walked on.
Never insert objects of any kind into the
product vents as that may result in re or
electric shock.
Unplug this product from the wall outlet
before cleaning.
Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
Do not disassemble this product. If service
or repair work is required, contact the
customer service helpline found in this
user guide.
Do not overload wall outlets and extension
cords.
Avoid using during an electrical storm.
Use a surge protector to protect the
equipment.
Do not use this phone to report a gas leak,
especially if you are in the vicinity of the
gas line.
Small metal objects may stick to the
handset due to the presence of magnetic
elds on the handset. Exercise caution
when used where metal objects can be
picked up.
Warning
Please note that this equipment is not
designed for making emergency telephone
calls when the power fails. Alternative
arrangements should be made for access
to emergency services.
Cleaning
Clean the handset and base (or charger)
with a damp (not wet) cloth, or an anti-
static wipe.
Never use household polish as this will
damage the product. Never use a dry cloth
as this may cause static shock.
Technical Information
How many telephones can I have?
All items of telephone equipment have
a Ringer Equivalence Number (REN),
which is used to calculate the number of
items which may be connected to any one
telephone line. Your Telstra Easy Control
101 has a REN of 0,2. A total REN of 3 is
allowed. If the total REN of 3 is exceeded,
the telephones may not ring. With different
telephone types, there is no guarantee of
ringing, even when the REN is less than 3.
Important: Only use the mains
power adaptors, cables and
rechargeable batteries supplied
in this box, or this product may
not work. Any replacement
rechargeable batteries must be
the same type. Telstra accepts no
responsibility for damage caused
to your phone by using any other
type of batteries.
Rechargeable batteries
already fitted
Remove this tab
and charge batteries
for 16 hours before use.
What’s in the box
Handset
Base
Telephone
line cord
(pre-installed)
Mains power
adaptor
2x AAA Ni-MH 550mAh
rechargeable batteries
(already in handset)
1 Plug in
1 2 3
2 Charge
1 Activate the batteries by
pulling the plastic tab
away from the bottom of
the handset.
2 The handset will check
for a link with the base
station. Once found,
follow the prompt to set
the date and time.
3 Place the handset on
the base to charge the
batteries for 16 hours.
16 hrs
Important: you should
charge the batteries
for 16 hours before
using the handset for
the rst time.
If you need to remove the batteries, open
the battery compartment cover and using
the nger hole, grip the batteries and
gently pull them out.
Your Easy Control 101 is ready to use.
3 Using your phone
Making and receiving calls
Make and end a call
Press green then dial the phone
number. Press red to end the call.
Answer a call
If Auto Pick-Up is set to On, lift the
handset from base to answer the call.
If Auto Pick-Up is set to Off, lift the
handset from base and press green
to answer the call.
If the handset is not on base you’ll need
to press green .
Mute
Press during a call. Press to
return to your caller.
1 The telephone line cord is already
tted, plug the other end into the wall
socket.
2 Plug the mains power adaptor into
the base, with the cable clipped in the
groove provided.
Using the menu
Press to open the main menu,
scroll through using or . When
the menu you want is displayed, press
. Press or to scroll through
the sub menus and press to
select.
and buttons let you select
options displayed above the buttons
on the display.
Use to exit a menu or go back.
If no buttons are pressed for 30
seconds
the handset will return to the
idle screen.
3 Plug the other end of the power
adaptor into the wall power socket
and switch on.
Easy Control 101 250816.indd 1 25/08/2016 12:14

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Telstra EASY CONTROL 101 and is the answer not in the manual?

Telstra EASY CONTROL 101 Specifications

General IconGeneral
BrandTelstra
ModelEASY CONTROL 101
CategoryCordless Telephone
LanguageEnglish

Related product manuals