EasyManuals Logo

Telstra EASY CONTROL 202 User Manual

Telstra EASY CONTROL 202
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
GETTING TO
KNOW YOUR
TELSTRA EASY
CONTROL 202
CORDLESS
PHONE WITH
ANSWERING
MACHINE
General information
Guarantee
Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for
a major failure and compensation for any other
reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable
quality and the failure does not amount to a
major failure.
To nd out more information about your
consumer rights if your device is faulty, please
call us on 13 22 00 or go to
https://go.telstra.com.au/helpandsupport/
home-phone/ or http://www.telstra.com/
faultyproducts
How to recycle your equipment
When the Telstra Easy Control 202 reaches its
end of life, it needs to be disposed of according
to local laws and regulations, please contact
the customer service helpline found in this user
guide for information on how to dispose of the
product free of charge.
Important safety instructions
Follow these safety precautions when using
your phone to reduce the risk of re, electric
shock, and injury to persons or property:
Keep all slits and openings of the phone
unblocked. Do not set the phone on a heating
register or over a radiator. Ensure that proper
ventilation is provided at the installation site.
Do not use while wet or while standing in water.
Do not use this product near water
(for example, near a bath tub, kitchen sink,
or swimming pool).
Do not allow anything to rest on the power
cord. Place the power cord so that it will not be
walked on.
Never insert objects of any kind into the product
vents as that may result in re or electric shock.
Unplug this product from the wall outlet before
cleaning.
Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
Do not disassemble this product. If service or
repair work is required, contact the customer
service helpline found in this user guide.
Do not overload wall outlets and extension cords.
Avoid using during an electrical storm. Use a
surge protector to protect the equipment.
Do not use this phone to report a gas leak,
especially if you are in the vicinity of the gas line.
Small metal objects may stick to the handset
due to the presence of magnetic elds on the
handset. Exercise caution when used where
metal objects can be picked up.
Warning
Please note that this equipment is not designed
for making emergency telephone calls when the
power fails. Alternative arrangements should be
made for access to emergency services.
Cleaning
Clean the handset and base (or charger) with a
damp (not wet) cloth, or an anti-static wipe.
Never use household polish as this will damage
the product. Never use a dry cloth as this may
cause static shock.
Technical Information
How many telephones can I have?
All items of telephone equipment have a Ringer
Equivalence Number (REN), which is used to
calculate the number of items which may be
connected to any one telephone line. Your Telstra
Easy Control 202 has a REN of 0,2. A total REN
of 3 is allowed. If the total REN of 3 is exceeded,
the telephones may not ring. With different
telephone types, there is no guarantee of ringing,
even when the REN is less than 3.
Important: Only use the mains power
adaptors, cables and rechargeable batteries
supplied in this box, or this product may
not work. Any replacement rechargeable
batteries must be the same type. Telstra
accepts no responsibility for damage
caused to your phone by using any other
type of batteries.
Rechargeable batteries
already fitted
Remove this tab
and charge batteries
for 16 hours before use.
What’s in the box
Handset
Base
Telephone
line cord
(pre-installed)
Mains power adaptor
2x AAA Ni-MH 550mAh
rechargeable batteries
(already in handset)
Handset
2x AAA NiMH 550mAh
rechargeable batteries
(already in handset)
Mains
power
adaptor
Charger
For each additional handset
1 Plug in
1 2 3
2 Charge
1 Activate the batteries by
pulling the plastic tab away
from the bottom of the
handset.
2 The handset will check for
a link with the base station.
Once found, follow the
prompt to set the date and
time.
3 Place the handset on the
base to charge the batteries
for 16 hours.
16 hrs
Important: you should charge
the batteries for 16 hours
before using the handset for
the rst time.
Set up your additional handsets
1 For each additional handset and charger: plug
the mains power adaptor into the socket on
the underside of the charger, secure the cable
behind the retaining clip and plug the other
end into the wall power socket and switch on.
2 Activate the batteries as shown above. Then
place the handset on the charger to charge
for 16 hours.
If you need to remove the batteries, open the
battery compartment cover and using the nger
hole, grip the batteries and gently pull them out.
Your Easy Control 202
is ready to use.
3 Using your phone
Making and receiving calls
Make and end a call
Press green then dial the phone number.
Press red to end the call.
Answer a call
If Auto Pick-Up is set to On, lift the handset
from base or charger to answer the call.
If Auto Pick-Up is set to Off, lift the handset
from base or charger and press green
to
answer the call.
If the handset is not on base or charger you’ll
need to press green
.
Mute
Press during a call. Press to return to
your caller.
1 The telephone line cord is already tted,
plug the other end into the wall socket.
2 Plug the mains power adaptor into the
base, with the cable clipped in the groove
provided.
3 Plug the other end of the power adaptor
into the wall power socket and switch on.
Phonebook
Store entry in phonebook (up to 50)
1 Press , then press again. Scroll
to New Entry, press .
2 Enter name using keypad and press .
3 Enter phone number and press to save.
4 Add to VIP? is displayed. Press if you
want to add to your VIP list , otherwise
press
. Saved! is displayed.
To save a number to your phonebook from
the Calls list, press
, then . Scroll to
the number and press . Save Number is
displayed, press
. Enter name and press .
Edit the number if required, press to save.
Dial entry in phonebook
1 From the home screen, press .
2 Scroll or to display the entry and
press to dial.
Easy Control 202 250816.indd 1 25/08/2016 11:27

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Telstra EASY CONTROL 202 and is the answer not in the manual?

Telstra EASY CONTROL 202 Specifications

General IconGeneral
BrandTelstra
ModelEASY CONTROL 202
CategoryCordless Telephone
Battery LifeUp to 10 hours talk time
Standby TimeUp to 100 hours
Caller IDYes
Handset Quantity1
Answering MachineNo
Headset JackNo
SpeakerphoneYes
TypeCordless Phone
FrequencyDECT
RangeUp to 300m outdoor / 50m indoor
DisplayLCD
Phonebook Capacity50 entries

Related product manuals