What to do if my Tempest Fog Machine appears dead?
If your Tempest Fog Machine appears dead, there are a couple of things you can check: * First, the mains fuse may have blown, so replace the fuse. * Second, there may be no power at the AC cable inlet, so check the power cable and circuit breaker.
Why is my Tempest Leader SMOKE 3 not producing fog?
If your Tempest Fog Machine is not producing fog when the control panel is set to CONTINUOUS or the fog button is pressed, it could be due to the following reasons: * The machine might not be at the correct operating temperature. Wait until the HEAT message is no longer shown. * The FOG option might be set to 0. Increase the setting.
What to do if the remote is not working with my Tempest Leader SMOKE 3?
If you're experiencing a loss of control from the remote with your Tempest Fog Machine, there may be a communication issue between the remote and the machine. Check the cable connection between the remote and the machine to ensure it is properly connected.
What to do if my Tempest Leader SMOKE 3's fog output is weak?
If the fog output of your Tempest Fog Machine is weak, the machine may require priming. To do this, power down the unit, make sure the fluid bottle is full, and check that the tube is fully inserted.
Why is my Tempest Leader SMOKE 3 producing wet fog?
If your Tempest Fog Machine is producing wet, greasy, non-uniform fog output, fluid drips or spits from the nozzle, or makes a very loud noise when firing, it could be due to incompatible fog fluid. Make sure to use approved fluid!
Guidelines to prevent electrical hazards during operation and maintenance.
Precautions to avoid burns from hot surfaces and prevent fire risks.
Measures to prevent physical harm, including falling or contact with hazards.
Instructions for safe operation to avoid respiratory issues from fog.
Details on machine dimensions, weight, and physical design features.
Covers output volume, fluid consumption, power requirements, and thermal limits.
Information on control systems, internal structure, fluid management, and installation.
List of certifications and compliance standards for the product.
Initial steps for placing the machine and connecting power.
Basic instructions for operating the machine to produce fog.
Guidelines for choosing an appropriate location and required clearances.
Procedure for filling the fluid tank and preparing the machine.
Verification steps before applying power to ensure safe operation.
Instructions for powering on the machine and checking readiness.
Description of the remote control interface and adjusting fog output.
Details on continuous operation and setting the timer functions.
Procedures for resetting the machine and using the auxiliary input.
Procedures for cleaning the machine to maintain performance and longevity.
Instructions for safely replacing internal and external fuses.
Guidelines to prevent electrical hazards during operation and maintenance.
Precautions to avoid burns from hot surfaces and prevent fire risks.
Measures to prevent physical harm, including falling or contact with hazards.
Instructions for safe operation to avoid respiratory issues from fog.
Details on machine dimensions, weight, and physical design features.
Covers output volume, fluid consumption, power requirements, and thermal limits.
Information on control systems, internal structure, fluid management, and installation.
List of certifications and compliance standards for the product.
Initial steps for placing the machine and connecting power.
Basic instructions for operating the machine to produce fog.
Guidelines for choosing an appropriate location and required clearances.
Procedure for filling the fluid tank and preparing the machine.
Verification steps before applying power to ensure safe operation.
Instructions for powering on the machine and checking readiness.
Description of the remote control interface and adjusting fog output.
Details on continuous operation and setting the timer functions.
Procedures for resetting the machine and using the auxiliary input.
Procedures for cleaning the machine to maintain performance and longevity.
Instructions for safely replacing internal and external fuses.
General| Brand | Tempest |
|---|---|
| Model | Leader SMOKE 3 |
| Category | Fog Machine |
| Language | English |
To Next Page
