3
SAFETY GUIDE
Failure to follow the operating, maintenance and lubrication
requirements set forth in this manual may result in serious
personal injury or death and/or damage to equipment or property.
e following WARNING statements indicate potentially
hazardous conditions for operators and equipment. Make certain
that anyone who works on or around this tool has read and fully
understands the safety precautions listed.
1. Carefully read this owner’s manual and the power head
manufacturer’s manual before attempting to operate, service
or disassemble any part of your VentMaster® Fire Rescue Saw.
2. DO NOT operate the unit when mentally or physically
fatigued or impaired.
3. Stay away from rotating parts; avoid wearing loose jackets,
shirts, and ties. Keep hands and feet away from moving parts.
4. Keep all unauthorized personnel at a safe distance from the
saw.
5. Keep all guards in place. DO NOT make repairs while the
unit is running. DO NOT operate if any guard is not in place.
6. Always wear eye protection. Loose debris can be picked up
and own in the air.
7. Hearing protection is required. Engine and cutting noise may
exceed safe dB levels.
8. Gasoline is extremely ammable and is explosive under
certain conditions. To prevent re hazards, do not place
ammable objects close to the engine.
9. Do not over ll the fuel tank. A er refueling, make sure the
tank cap is closed properly and secured. If any fuel is spilled,
make sure the area is dry before starting the engine.
10. Never operate in an enclosed or con ned area over prolonged
periods of time. Exhaust contains poisonous carbon
monoxide gas; exposure may cause loss of consciousness and
may lead to death.
11. e mu er becomes very hot during operation and remains
hot for some time a er stopping the engine. Be careful not
to touch the mu er while it is hot. To avoid severe burns or
re hazards, let the engine cool before transporting or storing
the unit.
12. It is the sole responsibility of the owner/operator to develop
procedures for proper use of the VentMaster® Fire Rescue Saw
in accordance with generally accepted ventilation techniques
as well as the organization’s own operating procedures, before
placing the unit into service.
GENERAL INFORMATION
SAW IDENTIFICATION
Each VentMaster® Fire Rescue Saw has a part number as well
as a serial number. e part number identi es the type of unit
(powerhead, bar length, etc.) while the serial number relates to
information referencing the date of manufacture. is information
is useful should it become necessary to contact the factory
regarding your VentMaster® Fire Rescue Saw.
SERIAL NUMBER LOCATIONS
e serial number is typically located on the right side of the
engine cover.
Please write the Serial Number of your VentMaster® Fire Rescue
Saw in the spaces below. is will aid us in identifying which
model you have when assisting you.
Model (Part No.)
Date
Serial No.
WARRANTY
Warranty information on your unit can be found on the back page
of this manual. For further information, please contact Tempest
Technology Corp.
To Next Page
Loading...