Temsa TS 35 - Page 94

8.8 JANUARY MAINTENANCE LIST (YEAR 3)
Maintenance Description
Wash Undebody and Check
Coating
Underbody should be washed with low pressure
water. Underbody coating must be checked for
peeling&spalling, If wear exists, coating
1
must be
renewed in required areas.
Check the vehicle Paintwork
Paintwork must be checked. If any scratches and
paintwork damages observed, paint of the damage
area must be renewed.
Signature of Service/Dealer
Maintenance Date :
Mileage :
Registration Plate :
Repair Maintenanace Service (Workshop)
1: Coating: Dinitrol 3641 A 80 - AB-01-027Y - Wide min 300 µ
94|TEMSA TS 35 Rev. 08/01.11.13