Need help?Do you have a question about the Temsa TS 35 and is the answer not in the manual?
Details TEMSA's responsibilities for repairing or replacing defective components.
Specifies the duration of the warranty for the vehicle.
Instructions on how to obtain warranty service.
Lists items and conditions explicitly not covered by the warranty.
States the sole and exclusive remedy available under warranty.
Maintenance schedule adjustments for vehicles used in severe conditions.
Recommendations and methods for preventing vehicle corrosion.
Guidelines for washing the vehicle to protect against corrosion.
Specific guidelines for washing new vehicles, including pressure washing.
Maintenance tasks for the vehicle's underbody.
Procedures for repairing paint damage and scratches.
Applying wax and polishing for vehicle surface protection.
Recommended actions for preparing the vehicle for winter.
Repair procedures for stone chips and paint damage.
Guidelines for body repair after an accident.
Ensuring correct anti-corrosion measures upon vehicle receipt.
General care instructions, including DIY checks and turbocharger care.
Procedure for transferring the vehicle warranty to a new owner.
Recommended intervals for changing vehicle fluids and parts.
Maintenance tasks not dependent on vehicle mileage.
Introduction to the document's purpose and scope.
Safety precautions and general advice.
Essential safety gear for various procedures.
Additional equipment needed for painting.
Step-by-step guide to sandpapering surfaces.
Guidance on selecting sandpaper grits for different tasks.
Instructions for removing old paint layers using sandpaper.
Method for blending paint layers to avoid visible lines.
Method for blending paint layers to avoid visible lines.
Steps for cleaning surfaces before painting.
Procedures for masking areas not to be painted.
Technique for masking prior to batching.
Method for masking surfaces to be painted.
Details on using guns for applying paint, primer, and wax.
Guidelines for using infrared heaters for drying.
Definition and causes of metal corrosion.
Factors leading to vehicle corrosion.
Identifies specific zones on the vehicle prone to corrosion.
Procedures for treating corrosion on engine and its coverings.
Procedures for treating corrosion on engine compartment tubes and brackets.
Application of waxing material for engine compartment protection.
Treatment for corrosion on chassis profiles.
Application of waxing material to screws in the chassis.
Procedure for applying underbody coating.
Application of waxing material to chassis profiles.
Detailed steps for luggage compartment corrosion treatment.
Treatment procedures for luggage compartment corrosion.
Steps to treat corrosion on window sides.
General| Brand | Temsa |
|---|---|
| Model | TS 35 |
| Category | Automobile |
| Language | English |
To Next Page
