6.4 PROFILE WAXING APPLICATION
Inside of the proles could be waxed with
Efcoat WH 492 A1 Anti Corrosive Material.
For Wax application two way wand should
be used.
1. Clean the underbody using the high
pressure wash
2. Dry the underbody
3. Apply Efcoat WH 492 A1 to the
waxing holes. Wax should be applied
all the holes in the underbody. Waxing
holes are 8 mm.
4. Wait 20 Minutes.
5. Remove excess residue, from waxing
holes with clean cloth
6. PROCEDURE FOR CHASIS (ZONE B)
To Next Page
Loading...
