Temsa TS 35 - Maintenance Schedules and Intervals; PROPOSED CHANGE INTERVALS

TEMSA TS 35 |23Rev. 08/01.11.13
PROPOSED CHANGE INTERVALS
Capacity Norm Class
CHANGING PERIOD
(Which comes rst)
Engine oil &
Engine oil lter
(EPA10 ISL 8.9 345HP)
(EPA13 ISL 8.9 345HP)
7,4 gal SAE 15W 40 API CH-4 20.000 mi/6 months
Transmission oil
(ALLISON B 500)
11,9 gal
(TES295)
Synthetic
Transmission Oil
Castrol
TranSynd
160.000 mi/4 year
Differential oil &
Rear Axle
(ZF A132)
4,2 gal SAE 80W 90
ZF-Ecouid TE-ML
12B/12E
Hot-country
operation
40.000 mi/1 year
Normal
operation
90.000 mi/3 years
Power steering 1,2 gal DONAX TX
AUTRAN MBX
DEXRONII
70.000 mi/2 years
A/C compressor oil 1 gal − Polyolester (POE) −
Antifreeze NF 10,5 gal − CES 14603 160.000 mi / 2 years
A/C Gas 15,4 lbs − R 134 A −
Linnig Angel Gearbox
Drive oil
0,1 gal 75W 90 DEAGEAR Synth 50.000 mi
Hub Grease 1,3 lbs − ZF TE-ML 12 300.000 mi / 2 years
Wax − Efcoat WB 463 A1 −
Tire pressure Front Rear
125 PSI 125 PSI
The denomination ‘’hot country use’’ is derived from the area where the vehicle is used, rather than from a country in the sense of a state.It is assumed
that the conditions are ‘’Hot Country Use’’ when:
1. The monthly average temperature exceeds 77°F (25°C) in more than 2 months within a year.
2. or if temperature rise above 104°F (40°C) on more than 7 days in a year.
Examples for possible countries or regions are : America: USA (South and deserts), Mexico.