Temsa TS 35 - Safety Equipment and Procedures; 2.1 SAFETY EQUIPMENTS & ACCESSORIES

2.1 SAFETY EQUIPMENTS & ACCESSORIES
2.1.1 STANDARD ACCESSORIES
2.1.2 SAFETY EQUIPMENTS & ACCESSORIES FOR SANDPAPAERING PROCESS
Make sure that technicians do not wear their hair long and loose, or wear loose clothing or jewelery,
including rings, all of which present safety hazards, as such objects are likely to be pulled in or get
caught in the tools.
Safety goggles protects
your eyes against dust
and small particles while
sandpapering, painting,
cleaning etc. Also they are
used to protect eyes against
vapor of any chemical
consumables such as
thinner, primer etc.
Sandpapering causes small particles
suspending in the air which may be
easily inhaled. Use paper masks to
avoid inhaling small particles.
Use safety gloves to protect your
hands while lifting - transferring
parts, using tools.
High noise level during some
procedures such as grinding,
cleaning, priming may cause
permanent auido damage. Use
ear protectors to avoid damage.
With the thick base and metal
protector sheet in front of them,
safety shoes protect your feet
against any hit.
Standard safety equipments have to be used for all procedures.
In addition to standard accessories stated above, some
equipments have to be used during sandpapering
process.
2. PRECAUTIONS
Safety Goggles
Paper Masks
Safety Gloves
Ear Protectors
Safety Shoes
CAUTION
Masks used for sandpapering process must
meet the EN149:2001 FFP2 standart.
TEMSA TS 35 |71Rev. 08/01.11.13