1.Switch On/O
PM2.5 Concentration
PM10 Concentration
Particle Count (For Ref)*
Air Quality Indicator
Press and hold button for 2 seconds to turn on/o the detector.
After initialization, the instrument enters the default interface.
2.Detection
2.1 PM2.5 Button
Please click the button to view the following four interfaces.
PM2.5 Graph View
5
Temtop
Air quality detector
Notice
Do not place detector in
heavily polluted
environments for a long time,
or it may cause damages to
the sensor.
15%
* The particle counts are for reference only. For accurate particle counts
please choose a professional particle counter from Temtop.
To Next Page
Loading...
General