8
Note：
1) Please click "II/ " button to switch between running mode and
holding mode.
In running mode, the detector always displays currently detected data.
In holding mode, the detector paused the detection function and will stop
updating data on the screen.
2) Data updates every 3 seconds when x axis value is within 72 seconds.
Data updates every 1 minute when x axis value is within 24 minutes.
Data updates every 5 minutes when x axis value is within 120 minutes.
Data updates every 30 minutes when x axis value is within 12 hours.
TVOC Graph View
(LKC-1000S+/1000S+ 2nd)
TVOC
mg/m
3
▲
3.Settings Menu
Buttons
Date and Time
Power Saving
Data Export
Storage Interval
Calibration
Exit
Settings
Press and hold the button for 2 seconds in the main display of
"PM2.5, AQI, HCHO" to enter the system settings.
Button Setting Function
Up/Increase
Down/decrease
Left
Right
Confirm
3.1
3.2
Power Saving
Calibration
Exit
Settings
For LKC-1000S / LKC-1000S+ Only
3.3
3.4
3.5
For LKC-1000S 2nd/LKC-1000S+2nd Only
To Next Page
Loading...
General