Temtop M2000 Series - Settings and Customization; Date and Time Adjustment; Power Saving Configuration; Sensor Calibration Options

2.4 Settings
The Settings interface displays 6 options below ( fig.14 ).
Operation: Press or to select the desired option; press to enter the interface.
Settings
Calibration
fig.14
a. Date and time (Example Of Button Operation) :
Operation: Press or to adjust time and press to switch to next digit. Then press
to switch to
Save or Exit . Press to finish the settings and exit the interface.
Date and Time
Press the Up or Down button
to set the current value,
press the menu button to
switch to the next item.
fig.15
b. Power saving: Set power saving mode.
fig.16
1. Auto-o(min): enable/disable auto-o power function, unit in min.
2. Screen-o(min): enable/disable screen-o function, unit in min.
Press the Up or Down button
to set the current value,
press the menu button to
switch to the next item.
Press the Up or Down button
to set the current value,
press the menu button to
switch to the next item.
8
Settings
Calibration