Need help?Do you have a question about the Temtop M2000 Series and is the answer not in the manual?
General| CO2 Measurement Range | 400-5000 ppm |
|---|---|
| Humidity Range | 0-99%RH |
| Formaldehyde (HCHO) Measuring Range | 0-2 mg/m3 |
| TVOC Measuring Range | 0-5 mg/m3 |
| Display | LCD |
| Battery | lithium battery |
| Display Size | 2.8 inches |
| Charging Time | 3 hours |
Covers turning the detector on/off and initiating measurement detection.
Accessing real-time data, all info, and historical records.
Configure date, time, power saving, and other device parameters.
Set the data storage interval for historical data.
Export historical data via USB connection.
Adjust the device's date and time settings.
Configure auto-off and screen-off timer settings.
Access calibration for PM2.5, TEMP & HUM, CO2, and HCHO sensors.
Set alarm thresholds for pollutant concentrations.
Select the display language (Chinese or English).
View user guidance and troubleshooting information.
Provides reference standards for PM2.5, PM10, CO2, and HCHO levels.
Addresses common questions about readings, stability, and accuracy.
Explains differences between device readings and official announcements.
To Next Page