Need help?Do you have a question about the Ten-Tec 238A and is the answer not in the manual?
Overview of the installation process for the antenna tuner.
Instructions for safely unpacking and checking the antenna tuner for damage.
Guide on how to connect the transmitter to the antenna tuner's input.
Explains the importance and method of establishing a proper ground connection.
Details how to connect various types of antennas to the tuner's terminals.
Information on powering the meter lamp for visibility.
Brief overview of how to get the antenna tuner operational.
Details the functions of the Capacitor, Inductor, Impedance Switch, Meter Select Knob, and SWR Set controls.
Step-by-step procedure for matching antenna systems to the transmitter.
Instructions for selecting and connecting different antennas.
How to use the integrated meter for power and SWR readings.
Practical tips for optimizing tuner performance and operation.
Critical safety warnings and precautions for operating the antenna tuner.
Explains how conductors act as radiators and the concept of radiation resistance.
Discusses transmission line characteristics, impedance, and how they affect matching.
How transmission lines transform impedance and affect standing waves.
Defines SWR and its relation to system mismatch and load resistance.
Summarizes key concepts related to antenna systems and matching.
Details the procedures for aligning the SWR bridge and calibrating the internal wattmeter.
Introduces the chapter detailing circuit diagrams and layout information.
Provides a technical description of the antenna tuner's circuit design.
Illustrates the different network configurations used in the tuner.
Lists all components for the tuner's circuit boards and chassis.
To Next Page
General