E-mail: tenamic@aliyun.com 04
FACTORY SETTINGS
● Initial password: “1234”.
● No initial fingerprint.
CAUTION: The fingerprint and password can only be used after the battery is installed.
OPEN THE DOOR
● First press any button once to bring the safe out of standby mode, then enter the factory code “1234”. The
green LED will light.
● After setting, enter the correct password (the initial password is “1234”) or the correct fingerprint, the door
will open automatically.
● The internal light will automatically turn on and turn off after 30 seconds.
To Next Page
Loading...
