E-mail: tenamic@aliyun.com 03
OPENING YOUR SAFE FOR THE FIRST TIME
● When first opening, user should open the safe with the emergency key.
● Remove the key hole cover, then insert the emergency key, and turn it count clockwise.
● Turn the knob clockwise to open the door.
CAUTION: Finish operation, pull out the emergency key and keep it in a safe place.
INSERTING THE BATTERIES
● Open the door.
● Insert 4 * AA batteries into the battery compartment.
● Under normal condition, if both of the red and the green lights are on at the same time, it means the voltage
is low and you should insert new batteries.
CAUTION: Replace 4 fresh batteries by lining them up in a manner as indicated by the “+” and “-” signs. When
outage for longer than thirty minutes, you should reset the user’s code.
To Next Page
Loading...
