English
II. Connect clients to the
internet
Connect your wired device, such as a computer, to the
WAN/LAN or LAN port of the router using an Ethernet cable.
Connect your wireless device, such as a smartphone, to the
Wi-Fi network of the router using the Wi-Fi Name and Wi-Fi
Key labeled on the bottom panel of the router.
To further configure the router, such as changing the Wi-Fi name
and Wi-Fi key, log in to the web UI of the router by visiting
tendawifi.com on a connected device or download the Tenda
WiFi App by scanning the QR code below.
If you cannot log in to the web UI of the router, refer to Q2 in FAQ.
Tips:
Tenda WiFi App
•
•
02
To Next Page
Loading...
