English
Button & port
PWR Power jack
WPS/RST
Button/Port Description
WAN/LAN
LAN
NANO SIM
Used to reset the router, or start WPS negotiation of
the router.
WPS: Press the button, and the Wi-Fi LED indicator
( ) blinks. Within 2 minutes, you can enable the
WPS function of the client device (such as a
smartphone) to connect to the Wi-Fi network of the
router without entering the Wi-Fi password.
Reset: Hold down the button for about 8 seconds,
and release it when all LED indicators light off and
then light up. The router is reset.
•
•
WAN/LAN multiplexing port.
LAN port by default. Used to connect to such devices
as computers, switches or game machines. When the
Failover function is enabled, the WAN/LAN port only
serves as a WAN port.
Used to connect to computers, switches or game
machines, etc.
Nano SIM card slot.
Insert your Nano SIM card into this slot.
04
To Next Page
Loading...
