Tenda A5s - WISP Mode Setup

24

Formethodsofconfiguringmoreandfeaturedfunctionalities,
readsectionshereunder.
4.ClickFinishandrebootdevicetoactivatenewsettings.

Note:Inthismode,thedevice'sRJ45portfunctionsasaWAN
port for Internet connection. When activated, clients can only
connecttothedevicewirelessly.

6.3WISPModeSetup
To amplify uplink device's wireless signal (extend wireless
coverage),selectthismodemanually.
1.Select"WISPMode"andthenclick"Next'.