Tenda AC10 - Page 105

97
MTU
Application
10 Mbps HDX
10 Mbps Half Duplex. It indicates that the WAN port is working at the speed of 10
Mbps, but the port can only receive or send data packets alternately.
100 Mbps FDX
100 Mbps Full Duplex. It indicates that the WAN port is working at the speed of 100
Mbps, and the port can receive and send data packets at the same time.
100 Mbps HDX
100 Mbps Half Duplex. It indicates that the WAN port is working at the speed of 100
Mbps, but the port can only receive or send data packets alternately.