Tenda AC21 - Jack, Ports and Buttons

Jack, ports and buttons
English
04
WPS/RST POWERIPTV/3 WAN2
1
WPS: Press the button of the router for 1 to 3 seconds. Within 2
minutes, enable the WPS function of the other WPS-supported
device to establish a WPS connection.
Reset: When the SYS LED indicator blinks, hold the button down
for about 8 seconds, release it when all the LED indicators blink
once.
DescriptionJack/Port/Button
Power jack.
Used to connect to the included power adapter.
POWER
WPS/RST
WAN
1/2
IPTV/3
Used to start the WPS negotiation process, or to reset the router.
Used to connect this router to the internet.
They are LAN ports used to connect to the wired devices such
as computers or switches.
By default, it is a LAN port.
If the IPTV function of the router is enabled, it serves only as an
IPTV port used to connect to a set-top box.